Conveyor Belting & Belts by USA Conveyor Belting & Accessories

USA Conveyor Belting & Accessories, Call us today at 863-698-6248 or email us at usaconveyor@msn.com

Products > High Performance-Extreme Temperature Tapes > Fiberglass Cloth Tape 380 Series
Product Description
DuraStick® Fiberglass Cloth Tapes consist of a tightly woven, high tensile fiberglass cloth coated with a high-temperature silicone or acrylic adhesive. These tapes posses a high thermal rating, are flame retardant, abrasion and edge-tear resistant, conformable, and provide superior solvent resistance. DuraStick® Fiberglass Cloth Tapes are an excellent choice for electrical and mechanical applications where chemical resistance properties of PTFE (Fluon®) are not required.
DuraStick® Fiberglass Cloth Tape Characteristics
DuraStick® 380 series of Fiberglass Tapes are engineered to retain the distinctive properties of woven fiberglass, however by adding an adhesive, the need for mechanical fastening is eliminated.
Typical Applications
	Electrical and Electronics: Coil, component, and cable wrapping Motor lead and internal connections Insulating coil connections and coil ends Anchoring terminal boards Coil outer wraps Holding coil leads Cable harness wrapping	Other: Economical thermal spray tape Sealing and enclosing hermetically    -packaged components Additional applications exist. Contact AFC for more specific information.
Styles Available
Product ID Substrate Adhesive System Total Thickness (in.) Adhesion (oz/in. of width) Tensile Strength* (lbs/sq in) Dialectric Strength (volts) Max. Operating Temp. (F) 380-07S Glass-Cloth Silicone 0.007 40 160 4500 500 380-10S Glass-Cloth Silicone 0.010 40 175 5000 500 380-07A Glass-Cloth Acrylic 0.007 40 160 4500 350 380-10A Glass-Cloth Acrylic 0.010 40 175 5000 350
Although material width is standard, additional lead-time may be required. Please note: Additional thicknesses, styles and widths available upon special request. Other colors are available in above styles. Consult factory. *Disclaimer: The above tensile values are from Table 6 of Specification D579 and actual tensile values will vary. AFC tests tensile strength to ASTM D828 and actual tensile values will be provided upon request.